“As well as cleaning blades during clipping, blades should be thoroughly cleaned after clipping.” Wipe the back of the blade with an oil soaked cloth and then follow steps below for oiling them quickly and thoroughly. Depending on the build-up, the blades should start to run more freely, causing the motor to run slightly easier and quicker. You should see tiny bits of fur washing from in between the teeth of the blades. Run the blade in the pool of whatever liquid you choose to use. Turn the clipper on, with blade attached. (Something like! It’s not THAT important, washing up liquid and water will do fine) Using a small container, create a pool deep enough to immerse the blades (AND ONLY THE BLADES!). We don’t expect most people to have one but if you do have one, use it, if you don’t use a stiff brush! You can blow excess fur from the blade, but expect to get a fair share in your face! Here at Shear Ease we have an air compressor that we use. Remove excess fur and grit from around the blade with a stiff brush (similar to a toothbrush). There is no point in lubricating a dirty, gritty blade it will still go blunt quickly! CLEAN YOUR CLIPPER BLADES.įirstly, clipper blades need to be cleaned periodically while clipping. Storing your blades properly.Īn oil soaked cloth, clipper blade oil, 2 small containers and blade wash of some description. The cost of good quality clipper blade oil and the time it takes to care for your blades is tiny compared to the potential repair costs resulting from poor maintenance.Įffective care consists of 1. Proper care will help keep your clipper blades sharper for longer and will dramatically reduce wear and tear on your clipper. It is essential that clipper blades should be looked after properly, as not only does it affect the life of your blades, but more costly, the life of your clipper.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |